Digital Printing
Digital printing uses a digital imaging process that transfers the image directly onto plain paper without the need for traditional offset rollers and plates.

Digital printing is ideal for very quick short runs or for personalised print and has the advantage of low set up costs and a low minimum volume run.
See example to the right.

Where digital printing is an option, this is indicated on the product specification page for each CD packaging or DVD packaging product.

Litho Printing
Litho printing uses a technique where the inked image is placed on a printing plate (usually zinc/aluminium) in a series of dots, made from Cyan, Magenta, Yellow, Black (CMYK). this is then imprinted on a rubber cylinder and then transferred (offset) to the paper.

Litho printing is an ideal method of print for images with gradients of colour. The image must be supplied as 'pixel' artwork made from CMYK separations.
See example to the right.

Where litho printing is an option, this is indicated on the product specification page for each CD packaging or DVD packaging product.

Screen Printing
Screen printing uses a technique where ink is pushed through a nylon or polyester screen. The result is a perfect crisp edge.

Screen printing is an ideal method of print for block colour artwork. The logo must be supplied as 'vector' artwork and coloured in Pantone Solid Coated colours.
See example to the right.

Where screen printing is an option, this is indicated on the product specification page for each CD packaging or DVD packaging product.

Embossed
Embossing uses a technique where two 3D aluminium dies are created from your artwork, a male and female. The packaging to be embossed is sandwiched between the dies and compressed together. It is the combination of heat and pressure which squeeze and mold the fibres into the shape of your artwork. The result is an image in 3D on the leather.

Like screen printing, embossing is an ideal method of print for block artwork. The logo must be supplied as 'vector' artwork.
See example to the right.

Where embossed is an option, this is indicated on the product specification page for each CD packaging or DVD packaging product.

Debossed
Debossing uses the same technique as embossing where two 3D aluminium dies are created from your artwork, a male and female. The packaging to be debossed is sandwiched between the dies and compressed together. It is the combination of heat and pressure which squeeze and mold the fibres into the shape of your artwork. Debossing creates depressions rather than raised impressions as in embossing.

Like screen printing, debossing is an ideal method of print for block artwork. The logo must be supplied as 'vector' artwork.
See example to the right.

Where debossed is an option, this is indicated on the product specification page for each CD packaging or DVD packaging product.

Lamination
Lamination is a very durable transparent film of plastic that is applied to the surface of the packaging, this will make the product more sturdy and water resistant to the treated surfaces.

Both glossy and matte lamination are the type of finishes that can be added to the packaging.
See example to the right.

Where laminates is an option, this is indicated on the product specification page for each CD packaging or DVD packaging product.

Metallic Printing
Metallic printing is used when wanting to achieve a metallic look or a shine. This look is accomplished by actually putting metallic particles in the ink so they reflect light.

Metallic printing is a great way to enhance the final print and there are hundreds of colours to choose from so you don't have to just stick to silver and gold.
See example to the right.

Where metallic printing is an option, this is indicated on the product specification page for each CD packaging or DVD packaging product.

Gloss Finish
Gloss finishing is a process where a gloss varnish is applied to the packaging, adding a shiny coating to the finished product  The gloss finish makes the product more sturdy and water resistant to the treated surfaces.

A gloss finish can also add impact to your packaging, where optimum presentation is paramount.
See example to the right.

Where gloss finish is an option, this is indicated on the product specification page for each CD packaging or DVD packaging product.

Matt Finish
Matt finishing is a process where a matt varnish is applied to the packaging, adding a non-glossy and smooth look to the finished product  If the packaging has small text then using a matt finish makes it easier to read as the matt varnish scatters the light, reducing glare.

A matt finish can also soften the appearance of any images used. See example to the right.

Where matt finish is an option, this is indicated on the product specification page for each CD packaging or DVD packaging product.